HH2 Chassis Horns

Description

HH2 Chassis Horns – 1/25 Scale Asphalt Modified

A precision‑printed pair of chassis horns designed for builders who want accurate scale geometry, crisp tube definition, and a paint‑ready finish straight out of the package.

These horns are 3D printed on Elegoo Mars 3 Pro–series resin printers using high‑resolution settings to capture the smooth tube transitions, angled profiles, and mounting geometry found on real Asphalt Modified front‑end chassis horns. Supports are generated in CHITUBOX Software to ensure stability during printing while keeping cleanup minimal.

Every part is cleaned with degreaser and 91% isopropyl alcohol, fully cured, and delivered ready for primer and paint.

Detailed Horn Description (Based on the Photo)

The HH2 Chassis Horns feature realistic front‑end tube construction, including:

• Left & Right Horn Assemblies Each horn is shaped with the correct downward angle and forward sweep used on modern Modified chassis. The geometry matches the real‑world horn profile that ties into the front clip and bumper mounts.
• Smooth Tube Transitions The photo shows clean, uninterrupted tube runs with proper scale thickness and realistic weld‑point intersections — no resin distortion or flattening.
• Correct Mounting Geometry The rear ends of the horns include flat mounting pads and alignment surfaces that match Hurd Hobbies front clips and chassis frames, ensuring a drop‑in fit.
• Forward Bumper Connection Points The horn tips are shaped to accept front bumper assemblies, allowing builders to mount parallel, drop‑bar, or braced bumper styles accurately.
• Reinforcement‑Style Contours Subtle shaping along the horn tubes replicates the slight bends and fabrication style seen on full‑scale Modified chassis horns.
• Clean Resin Finish The horns print with smooth surfaces ideal for primer, paint, or weathering effects.

These horns are designed to integrate seamlessly with Hurd Hobbies front chassis clips, bumper assemblies, and full chassis frames.

Key Features

• Ready to Paint: Fully cleaned, cured, and prepped for primer.
• Professional Resin Workflow: Degreased and rinsed with 91% IPA for a residue‑free finish.
• High‑Detail Printing: Produced on Elegoo Mars 3 Pro (and Mars‑series equivalents) for sharp tube edges and smooth transitions.
• Optimized Support Strategy: CHITUBOX‑generated supports minimize sanding and preserve fine structural details.
• True‑to‑Scale Geometry: Designed specifically for 1/25 Asphalt Modified builds — SMART Tour, Whelen Modified, and similar chassis styles.

What You Receive

A clean, crisp, paint‑ready pair of HH2 Chassis Horns that provide an authentic foundation for the front‑end structure of your 1/25 Asphalt Modified build.