Chassis Frame – Fury

Description

Type‑F Chassis Frame – 1/25 Scale Asphalt Modified

A highly detailed, professionally printed chassis frame designed for builders who want true‑to‑scale geometry, crisp tube definition, and a paint‑ready finish straight out of the package.

This Type‑F chassis is 3D printed on Elegoo Mars 3 Pro–series resin printers using high‑resolution settings to capture the complex tube structure, cross‑bracing, and front clip geometry found on modern Asphalt Modified race cars. Supports are generated in CHITUBOX Software to ensure stability during printing while keeping cleanup minimal.

Every frame is cleaned with degreaser and 91% isopropyl alcohol, fully cured, and delivered ready for primer and paint.

Detailed Chassis Description (Based on the Photo)

The Type‑F chassis frame features a realistic, competition‑style layout with:

• Full Center Cage Structure — Includes the main hoop, rear down‑bars, roof halo, and A‑pillar bars with correct angles and tube spacing.
• Front Clip Assembly — A detailed front section with parallel frame rails, cross‑members, and suspension mounting points that match real Modified chassis architecture.
• Rear Clip Geometry — Includes the rear frame rails, bumper mounts, and triangulated bracing for structural accuracy.
• Lower Frame Rails — Smooth, straight tube runs with correct scale thickness and realistic weld‑point transitions.
• Cross‑Bracing & Triangulation — Multiple X‑braces and support bars throughout the center section for added realism and rigidity.
• Fuel Cell Area — Open rear section with proper spacing for fuel cell placement and rear bumper integration.
• Roll Cage Detailing — Clean, crisp tube intersections that mimic real weld joints without excess resin buildup.
• Smooth Aero‑Friendly Lines — The entire frame is printed to preserve the clean, flowing geometry used in modern SMART Tour and Whelen Modified chassis designs.

This chassis is designed to integrate seamlessly with Hurd Hobbies suspension assemblies, bumpers, nerf bars, and body components.

Key Features

• Ready to Paint: Fully cleaned, cured, and prepped for primer.
• Professional Resin Workflow: Degreased and rinsed with 91% IPA for a residue‑free finish.
• High‑Detail Printing: Produced on Elegoo Mars 3 Pro (and Mars‑series equivalents) for sharp tube edges and smooth transitions.
• Optimized Support Strategy: CHITUBOX‑generated supports minimize sanding and preserve fine structural details.
• True‑to‑Scale Geometry: Designed specifically for 1/25 Asphalt Modified builds — SMART Tour, Whelen Modified, and similar chassis styles.

What You Receive

A clean, crisp, paint‑ready Type‑F Chassis Frame that serves as the foundation for a professional‑grade 1/25 Asphalt Modified build. Perfect for modelers who want authentic structure without the hassle of raw resin cleanup.